Yamaha MG16XU – 16-Input Mixer with Built-In FX and 2-In/2-Out USB Interface

Yamaha MG16XU – 16-Input Mixer with Built-In FX and 2-In/2-Out USB Interface

PRODUCT HIGHLIGHTS

• 10x Mic Inputs
• 16x Line Inputs
• 2-In/2-Out USB Up to 24-bit / 192kHz
• Built-In FX with 24 Presets
• XLR and TRS 1/4″ Stereo Outs
• Four Group Buses & Four Aux Sends
• “D-PRE” Mic Preamps with 48V Phantom
• HPF & 3-Band EQ on Channels 1-8
• 1/4″ Headphone Output with Level Control
• PAD & 1-Knob Compressor on Channels 1-8

• Yamaha MG16XU Specs

  Built-in Effects	SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
  Phantom Power	+48 V switchable, channels 1 – 12
  Digital I/O	USB: USB Audio Class 2.0 compliant Sampling Frequency: max 192 kHz Bit Depth: 24-bit
  Input Channels	8x mono [mic/line] 2x mono/stereo [mic/line] 2x stereo [line]
  Output Channels	2x stereo out 1x monitor out 1x headphone out 4x aux out 4x group out
  Bus	Stereo: 1 AUX: 4 GROUP: 4
  Pad	26 dB (mono)
  HPF	80 Hz, 12 dB/oct (mono/stereo: MIC only)
  Compressor	Threshold: +22 dBu to -8 dBu Ratio: 1:1 to 4:1 Output level: 0 dB to 7 dB Attack time: approx. 25 msec Release time: approx. 300 msec
  Equalizer	EQ high gain: +15 dB/-15 dB, frequency: 10 kHz shelving EQ mid gain: +15 dB/-15 dB, frequency: mono 250 Hz – 5 kHz peaking, stereo 2.5 kHz peaking EQ low gain: +15 dB/-15 dB, frequency: 100 Hz shelving
  LED	Peak LED turns on when post EQ signal reaches 3 dB below clipping
  Total Harmonic Distortion	0.03% @ +14 dBu (20 Hz to 20 kHz), GAIN knob: Min, 0.005% @ +24 dBu (1 kHz), GAIN knob: Min
  Frequency Response	+0.5 dB/-1.5 dB (20 Hz to 48 kHz), refer to the nominal output level @ 1 kHz, GAIN knob: Min
  Equivalent Input Noise	-128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
  Residual Output Noise	-102 dBu (STEREO OUT, STEREO master fader: min)
  Crosstalk	-78 dB
  Power Requirement	AC 100 – 240 V, 50 / 60 Hz
  Power Consumption	30 W
  Dimensions	17.5 x 5.1 x 19.7″ (444 x 130 x 500 mm)
  Net Weight	15.0 lb (6.8 kg)