Sachtler System FSB 6 Fluid Head with Touch & Go Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
Product Highlights
- FSB 6 Fluid Head with Touch & Go Plate
- Head with Load Capacity of 3.3 to 17.6 Pounds
- For Camcorders, DSLRs & Mirrorless
- 10-Step Counterbalance
- Flowtech 75 Carbon Fiber Legs
- Two-Stage, Three-Section Standard Legs
- Tripod Supports up to 44 Pounds
- Height Range Approximately 24 to 61″
- Removable Mid-Level Spreader
- Padded Carry Bag
Sachtler System FSB 6 Fluid Head with Touch & Go Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet supports cameras and accessories weighing between 3.3 and 17.6 pounds, and is well suited for DSLRs, mirrorless cameras, and small- to medium-sized camcorders. The head features a sliding balance plate with 4.7″ of adjustment to balance your camera, 10 steps of counterbalance adjustment and 3 steps plus a zero setting of independent pan and tilt drag. This amount of adjustability combines to give you precise control of your camera on the head, and the ability to easily tune your set up on a shot-by-shot basis.
The Flowtech legs are a lightweight set of tripod legs that can be used with or without the included mid-level spreader. The legs support up to 44 pounds, which means they can easily handle the weight of the FSB 6 Fluid Head with Touch & Go plate as well as your camera and accessories. The legs extend from approximately two feet to five feet and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top that allows you to open the leg sections to raise or lower the leg. The included padded carry bag is for storing or transporting the head and legs.
-
0405 FSB-6T Fluid Head
The Sachtler 0405 FSB-6T Fluid Head is a fluid head designed to work with the handheld size of DV, DVCAM, HVX and HDV camcorders. This head features the classic Touch and Go camera plate and was constructed with SOOM technology for performance matching larger Sachtler fluid heads.
- Frictionless Leak-Proof Fluid Damping
- Frictionless leak proof fluid damping with five level of drag, for perfect pictures while panning, without jerks and vibrations. Identical across both horizontal and vertical planes, and allows complete disengagement of drag for fast panning.
- Quick Release
- Touch & Go quick release for quick set up without having to bother to screwing the camera to head and then having to unscrew it again. Also features a safety lock lever that prevents inadvertent disengagement of the camera latch.
- Sliding Balance Plate
- Sliding camera mount and plate with a 2.4″ (60mm) sliding range quickly provides perfect balance across the horizontal (tilt) plane.
- SOOM
- The FSB-6 features the SOOM modular construction system.
-
Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24″ to a maximum height of 61″ when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.
Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.
Features
- Dual-stage, carbon fiber, 75mm bowl tripod
- Weighs only 6.4 pounds but supports up to 44 pounds
- The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.
- The included mid-level spreader allows you to work on uneven terrain such as stairs or rocks while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod’s foot spikes.
- Each leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don’t have to bend down to loosen a leg lock at the bottom to lower or raise the legs.
- The legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.
- When closing the legs, there is room for the mid-level spreader to be folded up while remaining attached. The legs feature a magnetic locking system strong enough to hold them together during transport, but allows you to easily release the legs when you want to set them up.
-
Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head
With dimensions of 36.6 x 7.9 x 9.1″, this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.
The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.
-
0405 FSB-6T Fluid Head
Load Capacity 3.3 to 17.6 lb (1.5 to 8 kg) Diameter/Thread 75mm Counter Balance System 10 steps Quick Release/Wedge Plate Yes Balance Plate Yes, 2.4″ (60mm) Sliding Range Tilt Range -70 to +90° Tilt Drag 3 Steps plus Zero Tilt Lock Yes Pan Range 360° Pan Drag 3 Steps plus Zero Pan Lock Yes Leveling Bubble/Illuminated Yes / Yes Temperature Range -40 to +140°F (-40 to +60°C) Weight 4.7 lbs (2.15kg) Packaging Info Box Dimensions (LxWxH) 18.1 x 10.1 x 8.2″ -
Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
Packaging Info Box Dimensions (LxWxH) 28.0 x 7.0 x 6.0″
-
