Libec TH-Z Tripod System with Mid-Level Spreader (75 mm)
- Compact Dual-Function Fluid Tripod Head
- 75mm Half Ball & Flat Base with 3/8″-16
- Aluminum Tripod with Built-In Spreader
- Zippered Soft Carry Case
The Libec TH-Z Tripod System features a 75mm half ball/flat base fluid head and aluminum 2-stage tripod with a built-in spreader. It also includes a zippered soft carrying case. The head supports up to 11 lb and features fixed counterbalance and drag. It can be attached directly to the tripod or mounted directly on sliders and other
Libec TH-Z Tripod System features a 75mm half ball/flat base fluid head and aluminum 2-stage tripod with a built-in spreader. It also includes a zippered soft carrying case. The head supports up to 11 lb and features fixed counterbalance and drag. It can be attached directly to the tripod or mounted directly on sliders and other support gear via the flat base, which has a 3/8″-16 mounting thread on the bottom. The head also has a snap-in camera plate system that allows for easier attachment of your camera. A pan bar is included and an optional second one is supported. The height range for the head and tripod combined is 28 to 63.5″.
The Libec TH-Z H Fluid Head is a compact dual-function tripod head with an 11 lb payload and fixed counterbalance and drag. It features a native 75mm half ball and has a flat base with a 3/8″-16 mounting thread on the bottom of the half ball. It’s directly compatible with 75mm bowl tripods but can also be mounted directly on sliders and other supports via the flat base. A tie-down is included for securing it to tripods.
The head has a snap-in camera plate system that lets you attach the included camera plate from above rather than slide it in from the rear. The plate has a sliding range of 1.2″ once secured. It comes with a 1/4″-20 mounting screw and an anti-twist video pin beside it. A long rosette-mount pan bar is included and an optional second one is also supported.
- 11 lb payload
- 75mm half ball with a flat base and 3/8″-16 mounting thread
- Snap-in camera plate system
- 1/4″-20 mounting screw with a video pin
- Long pan bar (an optional second one is supported)
- Fixed counterbalance and drag
- Illuminated bubble level
Libec TH-Z H Fluid Head Specs
Camera Plate Features | Sliding Balance Plate |
Camera Mounting Screw | 1 x 1/4″-20 Male with Locating Pin |
Balance Plate Sliding Range | 1.2″ / 3.05 cm |
Base Mount | 75 mm Half Ball 3/8″-16 Female |
Counter Balance | Fixed |
Pan Handle Fittings | 2 x Rosette |
Bubble Level | 1 x Illuminated |
Drag Control | Fixed |
Vertical Tilt | +90° to -80° |
Panning Range | 360° |
Load Capacity | 11 lb / 4.99 kg |
Weight | 2.4 lb / 1.09 kg |
Package Weight | 3.715 lb |
Box Dimensions (LxWxH) | 15.6 x 8.5 x 6.1″ |
Libec TH-Z T Aluminum Tripod With Mid-Level Spreader (75mm Bowl) Specs
Head Mount Type | 75 mm Bowl |
Maximum Working Height | 58.5″ / 148.59 cm (with Spreader) |
Minimum Working Height | 23″ / 58.42 cm (with Spreader) |
Closed Length | Not Specified by Manufacturer |
Materials | Aluminum |
Weight | 5.3 lb / 2.4 kg |
Leg Lock Type | Twist Lock |
Leg Sections | 3 |
Spreader | Mid-Level (Integrated) |
Package Weight | 7.7 lb |
Box Dimensions (LxWxH) | 31.75 x 8 x 7.5″ |
Libec RC-10 Tripod Carrying Case (Black) Specs
Carrying/Transport Options | Top Handle |
Type of Closure | Zipper |
Interior Dimensions | L: 36.6″ / L: 93.0 cm |
Package Weight | 1.2 lb |
Box Dimensions (LxWxH) | 13.9 x 8.4 x 5.3″ |