Blackmagic Design UltraScope
- 3G-SDI and Optical-Fiber SDI PCIe Card
- UltraScope Software
- For Editors & Colorists
- Broadcast-Quality Accuracy
- Parade Display
- Waveform Display
- Component Vectorscope View
- Histogram for Location Shoots
- Audio Level
- Picture View with VITC Timecode
Blackmagic Design UltraScope is hardware and software combination for getting accurate and professional waveform monitoring. Included is a 3G-SDI and optical-fiber SDI PCIe card and the UltraScope software, which features 6 different scopes for measuring all aspects of a broadcast video signal.
- Overview
- Blackmagic UltraScope is a combination PCI Express card and software package designed to work with a low-cost PC and display. UltraScope features standard BNC SDI inputs as well as optical fiber SDI inputs, and it automatically detects between SD-, HD-, and 3G-SDI video standards. SDI input is available as a reclocked SDI loop-through on both optical and copper SDI outputs. Blackmagic UltraScope is technically accurate for master monitoring and quality control tasks.
- 3G-SDI & Optical-Fiber SDI PCIe Card
- This unit is a 3G-SDI and optical-fiber SDI PCIe card designed for professional use.
- Parade Display for Colorists
- A real-time RGB parade waveform view is available for color correction. You can see the color balance in blacks, mids, and whites. RGB parade is also well suited for checking for illegal colors because any video that drops below the black line, or above the 100% line, is an illegal RGB color. Parade can also be switched to component to allow you to align equipment and decks.
- Waveform Display for Alignments
- When adjusting video levels or matching black background levels when keying, the waveform display can facilitate this work. Waveform view can be set to luminance-only or composite. Composite video is synthesized from the SDI input, which can make it easier to align traditional equipment such as decks. Since many editors know and understand composite waveform monitors, this module is usually very easy for them to use, despite the fact that it is a digital solution.
- Component Vectorscope View
- A vectorscope is the only way to ensure the accuracy of the colors you see. Use this device to determine if color has been removed for accurate white balance or adjust tint, among many other adjustments and readings.
- Histogram for Location Shoots
- Histogram view allows you to see where your pixels are distributed in the spectrum of black to white, thereby ensuring that you make the proper capture and can more effectively manage post-production work.
- Audio view for Monitoring Levels
- Keep track of audio with (8) channels of audio metering plus a stereo phase meter. The stereo phase meter plots left-right audio as an XY scope display so you know exactly what your audio is at all times. The audio scope allows you to see mono audio as you see a vertical line or stereo audio as a scope puff in all directions. Audio problems such as clipping and out-of-phase audio can be seen as a left- or right-leaning display.
- Picture View with VITC Timecode
- The picture view allows you to track video input so you always know what feed is connected to your Blackmagic UltraScope. Input video is selected from either the optical-fiber SDI or regular SDI inputs. The video standard is automatically detected and displayed above the video image. VITC timecode and RP188 HD timecode are also detected and read into a timecode counter on the top, right-hand side of the video image.
Blackmagic Design UltraScope Specs
| Connections | SDI Video Input: 1 x 10-bit SD, HD, and 3 Gbps HD switchable SDI Video Output: 1 x 10-bit loop-thru SD, HD, and 3 Gbps HD switchable Optical Fiber Video Input: 1 x 10-bit SD, HD, and 3 Gbps HD switchable via LC connector Optical Fiber Video Output: 1 x 10-bit loop thru SD, HD, and 3 Gbps HD switchable via LC connector Supported Video formats: 525i NTSC, 625i PAL, 720HD and 1080HD SDI Audio Input: 8-channel embedded in SD and HD SDI Audio Output: 8-channel embedded in SD and HD Optical Fiber Audio Input: 8-channel embedded in SD and HD Optical Fiber Audio Output: 8-channel embedded in SD and HD Multiple Rate support: SD-SDI, HD-SDI, and 3G-SDI Updates: Firmware for cards built into software driver Loaded at system start or via updater software |
| Standards | HD Format Support: 1080p 23.98/24/50/59.94, 1080i50, 1080i59.94, 720p50, and 720p59.94 SD Format Support: 625/25 PAL and 525/29.97 NTSC SDI Compliance: SMPTE 424M, 259M, and 292/296M Video Sampling: 4:2:2 Color Precision: 4:2:2 10-bit Color Space: 4:2:2 YUV SDI Metadata Support: VITC and RP-188 timecode Audio Sampling: Television rate of 48kHz at 24 bit Card Type: PCI Express 1 lane, compatible with 1, 4, 8, and 16 PCIe slots |
| Signal Processing | Hardware-based, real-time, colorspace conversion |
| Dimensions (HxWxD) | PCI-Express 4-lane card type |
| Weight | Not specified by manufacturer |
| Packaging Info | |
|---|---|
| Package Weight | 0.45 lb |
| Box Dimensions (LxWxH) | 5.4 x 5.3 x 1.1″ |
